Originally posted by dollag
View Post
Announcement
Collapse
No announcement yet.
will these fit?
Collapse
X
-
/// Exdos ///
"Men who try the impossible and fail spectacularly are infinitely superior to those who reach for nothing and succeed" --Napoleon Bonapart
-
-
Originally posted by dollag View PostFrom what I understand mike, these solve 2 different issues?
I am already ordering rogue rsm's and Meyle droplinks.
I was looking into the reinforced top plates also but I don't see how these help with the movement of the subframe it's self.
It will obviously have no influence on movement of subframe itself.
I'm interested to see how you get on with re-bushing the rear end, as this is something I will be doing soon as well.
Comment
-
Originally posted by M1ke View PostSorry I thought you were ordering rogue Top mounts (for rear shocks). Just highlighting an option that would save £50+ and give you the benefit of being able to change your top mounts again in the future without dismantling half of your car.....
It will obviously have no influence on movement of subframe itself.
I'm interested to see how you get on with re-bushing the rear end, as this is something I will be doing soon as well.
Comment
-
No probs.
Quite a few of us seem to be messing around with rear suspension at the moment! And it seems to be a bit of a minefield as to which parts to use! I am fairly confident that any new parts will offer a big improvement over the stock items, particularly if they are the originals!
New shocks have made a massive difference but I am still not 100% happy so need to inspect my rear beam bushes too.
Comment
-
rear bush inserts size.
OK Length is 3 inches,1 inch width,down a 1/4 of an inch,in a 1/4 of an inch,making the narrower end 3/4 of an inch, thickness of material is aprox 1/8th of inch..Ime old school ...sorry!
Hopefully you can understand this!!!
Comment
-
Originally posted by kwoffa View PostOK Length is 3 inches,1 inch width,down a 1/4 of an inch,in a 1/4 of an inch,making the narrower end 3/4 of an inch, thickness of material is aprox 1/8th of inch..Ime old school ...sorry!
Hopefully you can understand this!!!
Ill make them up myself and probably a template too.
I cannot help noticing at the thin end, it seems that they are chiseled slightly? As in they are not as thick.
Comment
Comment