Announcement

Collapse
No announcement yet.

big brake from E38?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    the fronts are fitted to several Porsche models inc 996/997 Cayman Boxster S etc

    Comment


    • #32
      inside, Is it hard to unscrew the screw number 4?
      http://bmwfans.info/parts/catalog/E3...ke_pad_sensor/

      Comment


      • #33
        Originally posted by inside View Post
        So I have these babies fitted and they do feel nice. They're E31 4 piston brembos + ebc bluestuff ndx + std. e46 m3 discs.

        Haven't done some extensive testing but so far, so good. Pedal feel is good, travel isn't bigger than before (which I was worried about), and deceleration is subjectively better. Brake bias also doesn't seem to be an issue, at least the rear doesn't get light on braking. Quite pleased.

        Hello Uros,

        that seems to be a cheap but effective BBK.
        Do the E31 Brembos fit without any modifications? Bolt on an M3 e46 rotor and this particular caliper and yo're done?

        What about the brake bias? I guess you had some chances to test this setup on the track or under heavy road-racing conditions (I remember a quite impressive vid on youtube... ) and can tell us some more...

        Best regards,
        Phil

        Comment

        Working...
        X