Hi There,
I bought my Aug 98' Z3M Coupe on 2009 and till now I unlocked & locked the fuel door on petrol stations which was a real pain. I decided to lock it with central locking system and need some details for my install.
Here are the unknown details,
1. Right Rear Inner Wheelhouse Panel:
New Part Number : 4114 8 413380 ( Produced between Apr '99 - Now)
Old Part Number : 4114 8 400036 ( Produced between Mar '97 - Mar '00)
As my car is Aug 98' I don't have the new type "right rear inner wheel house panel". Difference between old & new panel is the "L" shaped bracket (rather than bumper bracket) for fitting "fuel door lock actuator bracket" and hole for fitting wiring harness blind plug.
Question : I'm not sure if New Part (8413380) has a hole and "L" shaped bracket fitted on it ?
(Example Photo)
2. Wiring Details:
Actuator wiring is going inside from the hole on the wheelhouse panel to main wiring harness.
Question: Is there any special wiring for that?
3. Wiring cable support bracket:
For holding fuel door lock wire support bracket, there is a rivet screw fitted on "upper right exterior lateral part" part# 41218400040).
Question: On my car there is no rivet screw on exterior lateral part, how I can fit one is the question so any detailed photos would be appriciated.
I bought my Aug 98' Z3M Coupe on 2009 and till now I unlocked & locked the fuel door on petrol stations which was a real pain. I decided to lock it with central locking system and need some details for my install.
Here are the unknown details,
1. Right Rear Inner Wheelhouse Panel:
New Part Number : 4114 8 413380 ( Produced between Apr '99 - Now)
Old Part Number : 4114 8 400036 ( Produced between Mar '97 - Mar '00)
As my car is Aug 98' I don't have the new type "right rear inner wheel house panel". Difference between old & new panel is the "L" shaped bracket (rather than bumper bracket) for fitting "fuel door lock actuator bracket" and hole for fitting wiring harness blind plug.
Question : I'm not sure if New Part (8413380) has a hole and "L" shaped bracket fitted on it ?
(Example Photo)
2. Wiring Details:
Actuator wiring is going inside from the hole on the wheelhouse panel to main wiring harness.
Question: Is there any special wiring for that?
3. Wiring cable support bracket:
For holding fuel door lock wire support bracket, there is a rivet screw fitted on "upper right exterior lateral part" part# 41218400040).
Question: On my car there is no rivet screw on exterior lateral part, how I can fit one is the question so any detailed photos would be appriciated.
Comment