So after finally after 3 years of ownership I have a little more time to enjoy the coupe do a few jobs.
So far in my ownership it's had
Hand R arb's
rear suspension overhaul. fully re bushed (Rear beam and wishbones), Bilstein shocks, top mounts.....
yellow stuff brake pads.
New idler pulleys and belts
a few cosmetic bits (Pictures pre badge change!)
[IMG]
Fade away.... by Mike Lloyd, on Flickr]2016-01-04_05-01-13 by Mike Lloyd, on Flickr[/IMG]
New M badges ( thanks Dave P and Aceman)
Rondell 021's (need to sort front suspension out to reduce the 'poke' Kwv3's ordered, going to swap top mounts over as well)
[IMG]20150524_111818 by Mike Lloyd, on Flickr[/IMG]
Original wheels being re-furbed.
A few bits I need to do.
rear no. Plate screws are rusty, and plate is looking tired. I can't get the screws out though, hopefully this won't involve taking the tailgate to pieces.....
Front shocks are tired......
Bonnet badge is cracked
Want to have a good look at diff mount. The boot floor looks fine but I do have a creak from the rear.
Will get some photos up shortly.
thanks for reading, any advice on rear no. Plate welcome
So far in my ownership it's had
Hand R arb's
rear suspension overhaul. fully re bushed (Rear beam and wishbones), Bilstein shocks, top mounts.....
yellow stuff brake pads.
New idler pulleys and belts
a few cosmetic bits (Pictures pre badge change!)
[IMG]
Fade away.... by Mike Lloyd, on Flickr]2016-01-04_05-01-13 by Mike Lloyd, on Flickr[/IMG]
New M badges ( thanks Dave P and Aceman)
Rondell 021's (need to sort front suspension out to reduce the 'poke' Kwv3's ordered, going to swap top mounts over as well)
[IMG]20150524_111818 by Mike Lloyd, on Flickr[/IMG]
Original wheels being re-furbed.
A few bits I need to do.
rear no. Plate screws are rusty, and plate is looking tired. I can't get the screws out though, hopefully this won't involve taking the tailgate to pieces.....
Front shocks are tired......
Bonnet badge is cracked
Want to have a good look at diff mount. The boot floor looks fine but I do have a creak from the rear.
Will get some photos up shortly.
thanks for reading, any advice on rear no. Plate welcome
Comment