I just got my spare subframe back from powder coating after having the Ireland toe and camber kit welded in. I had it done same as Exdos has and Ireland advise. Toe outboard and Camber inboard. If someone can host the pics I can take as many as you like.
Announcement
Collapse
No announcement yet.
z3 m rear axle carrier
Collapse
X
-
Originally posted by siwilson View PostI just got my spare subframe back from powder coating after having the Ireland toe and camber kit welded in. I had it done same as Exdos has and Ireland advise. Toe outboard and Camber inboard. If someone can host the pics I can take as many as you like.
Comment
-
Exdos that makes good sense, looks good too, got my subframe yesterday and its a cracker. Won`t get time this week or maybe next week to compare but i would think there the same.. so if i buy the brackets off ebay and could someone just confirm these eccentric part no`s..
from a e39
eccentric bolts 4 x 33321095102
self locking collar nut 4 x 333267668
eccentric flat washer 4 x 33321092310
Would this be all i should need, if so best place to buy ?
Regards and thanks
Carl.
Comment
-
Originally posted by roe1963 View PostExdos that makes good sense, looks good too, got my subframe yesterday and its a cracker. Won`t get time this week or maybe next week to compare but i would think there the same.. so if i buy the brackets off ebay and could someone just confirm these eccentric part no`s..
from a e39
eccentric bolts 4 x 33321095102
self locking collar nut 4 x 333267668
eccentric flat washer 4 x 33321092310
Would this be all i should need, if so best place to buy ?
Regards and thanks
Carl./// Exdos ///
"Men who try the impossible and fail spectacularly are infinitely superior to those who reach for nothing and succeed" --Napoleon Bonapart
Comment
-
Well it's all done, subframe is identical apart from having to weld the extra exhaust bracket. Also had the toe and camber brackets fitted plus poly bushed the subframe and diff mount.
While the frame was off I stripped out the boot floor to check for cracks, peeled back all the soundproofing and luckily the car is just about perfect. had only popped one rivet where the diff mount sits under the floor.
So decided to have a good freind seam weld the full boot floor around all the seams, plus drilled out the rivet plus one either side just in case, also seam welded around the underside of the boot and diff mount. looks good I must admit , all fitted up and painted in two days,, camber kit works a treat, just need it setting up at some point but near enough for now.
Right what can I do next !!! Lol.
Comment
Comment