I see that there's been a bit of discussion on KW spring rates in the past, but no mention of specific rates. Has anyone ever found out what the actual rates are, I'm particularly interested in the front ATM.
I did a rough measurement earlier using a set of bathroom scales, a steel rule, a press and a calculator & came up with 346lb/inch; sound feasible, but I'd like to know what the actual spec is!
I also came up with the helper springat circa 85ibs.
I did a rough measurement earlier using a set of bathroom scales, a steel rule, a press and a calculator & came up with 346lb/inch; sound feasible, but I'd like to know what the actual spec is!
I also came up with the helper springat circa 85ibs.
Comment