Announcement

Collapse
No announcement yet.

Air-con condenser

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Air-con condenser

    I had the Air-Con chap round last week to recharge the cars - all went well until he got to the MC... no pressure, no vacuum. Just a loud hissing from behind the rad.
    New condenser needed which is fine but looking at RealOEM the part seems to have internal dimensions of 482W x 320H x 25mm. Then I find a previous thread which the Hella/ Behr link seems to measure it as 483W x 435H x 25mm : www.z3mcoupe.com/forum/showthread.php?t=19627

    Can anyone point me in the right direction?

    PS : 1999 S50

  • #2
    Picture of mine - part number 64539113678 far from square so the second measurement looks wrong?



    Comment


    • #3
      Another with different sizes,



      https://www.schmiedmann.com/en/produ...t=64539113678H

      Comment


      • #4
        I’ve got an old one in the garage off my first M Coupe, I’ll try to get to it tomorrow and measure it if you still want confirmation of dimensions.
        Pete C

        2000 Z3M Coupe - Cosmos Black Metallic/Black interior. 805 of 821 RHD built

        Previous BMWs

        2003 E46 M3 6 speed manual - Carbon Black/Black interior.
        2000 Z3M Coupe - Cosmos Black Metallic/Black interior. 692 of 821 RHD built
        1986 M635
        1985 E28 M5
        1983 E28 528i Alpina

        Comment


        • #5
          I'm happy to go with Dave's photo thanks Pete.
          It doesn't look a complicated job to swap out - just make sure to get the extra 'O' rings? Any other advice?

          Comment

          Working...
          X