Z3MCoupe.com Forums

Go Back   Z3MCoupe.com Forums > Z3MCoupé.com Forums > M Coupe Journals
HOME Gallery Register Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1061  
Old 19-08-2019, 09:25 PM
Ian_C's Avatar
Ian_C Ian_C is offline
Senior Member
 
Join Date: Dec 2011
Location: Lytham St Annes
Posts: 818
Default

Quote:
Originally Posted by Dave P View Post
Test fitted a 8.5"x 18" et43 ACS Type III racing wheel on the front to see what the clearance was like and surprised that there is more clearance to the face of the Brembo caliper but of course less to the side than with the 19". (20mm spacer fitted)

Stretched tyre on that Dave or is it the angle of the pic?
__________________
1998 ///M Coupe

Reply With Quote
  #1062  
Old 20-08-2019, 02:44 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Quote:
Originally Posted by Ian_C View Post
Stretched tyre on that Dave or is it the angle of the pic?
225/40/18 which is one of ACS's recommended sizes for a 8.5" wide wheel
__________________
Reply With Quote
  #1063  
Old 22-08-2019, 03:43 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Air intake tube and pipes before and after





__________________
Reply With Quote
  #1064  
Old 22-08-2019, 03:45 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Bit of tidying done on the engine bay,


__________________
Reply With Quote
  #1065  
Old 28-08-2019, 11:58 AM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Rear washer nozzle appears to be corroding inside due to amount of rusty water that came out of it when unblocked so bought a new replacement.
Just clips onto wiper arm.
part number 6168841000





__________________
Reply With Quote
  #1066  
Old 05-09-2019, 01:48 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Replaced Control arm bushes/brackets


__________________

Last edited by Dave P; 05-09-2019 at 01:50 PM.
Reply With Quote
  #1067  
Old 05-09-2019, 01:49 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Old ones still appeared to be in good condition,


__________________
Reply With Quote
  #1068  
Old 11-09-2019, 01:32 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

New old stock wiper set,

__________________
Reply With Quote
  #1069  
Old 13-09-2019, 02:41 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

Coupe has been in Darren Woods for the last couple of days having some work done,

new oil pan and hardware, new right side engine mount bracket, new front wheel bearings and backplates, new shells, new subframe brackets, service and a few more bits and bobs.

Old parts,


__________________
Reply With Quote
  #1070  
Old 13-09-2019, 02:41 PM
Dave P's Avatar
Dave P Dave P is offline
Administrator
 
Join Date: Dec 2008
Posts: 25,491
Default

__________________
Reply With Quote
Reply

Tags
a/c, acs, air ducts, airbag, arb mount, boot floor, bulbs, condensor, diff, diffuser, gauge, heatshields, hoses, mats, number plate light, number plates, outside temp sensor, rear view mirror, rocker cover, sills, stickers, tank straps, thermostat, undertray, wheel arch liners

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.