I've replaced the dryer on my car (the part that sits behind the driver's headlight). In anticipation I bought new o-rings for the compressor and dryer. According to realoem the compressor has 1x14mm (64508390603) and 1x11.1mm o-ring (64508390602) and they fitted fine.
However the dryer specifies 2x11.1mm o-rings with the same part number, 64508390602, but they do not fit properly, they are much smaller/thinner and really loose on the pipe. So for now I've refitted the old o-rings which looked in good condition. They are noticeably fatter and green in colour.
I can't remember if there was a thread mentioning this or it's an error on realoem?
However the dryer specifies 2x11.1mm o-rings with the same part number, 64508390602, but they do not fit properly, they are much smaller/thinner and really loose on the pipe. So for now I've refitted the old o-rings which looked in good condition. They are noticeably fatter and green in colour.
I can't remember if there was a thread mentioning this or it's an error on realoem?
Comment