My front bumper appears to be slightly "in" and closer to my nearside headlight,it looks like if i could tilt the top part forward this would increase the gap and bring it forward?is this possible? i thought it might be the bonnet being closed tighter on that side however if i adjusted the bonnet the gap may be bigger but not more forward,hope this makes sense,and any pointers would be good.Thx in advance, Mel
Announcement
Collapse
No announcement yet.
front bumper alignment???
Collapse
X
-
You have the 2 Torx bolts(55) that you access from under the bumper.. This gives you backward and forward movement..
There is also 2 brackets behind the wheel arch liners(one either side) that can be adjusted for the height of the bumper in relation to bonnet/wheel arch line..IIRC they are 10mm headed bolts that hold the bracket.
HTH..
-
I was looking in to bumper removal at weekend and reading this, which may be of use to you:
http://adkusters.hobby-site.com/TIS%.../51_11_000.pdf
(Thankfully I've managed to sort my problem with side marker lights without having to remove the bumper... turned out to be the cheapo LEDs I got from eBay acting weird, not the loom shorting somewhere which is what I thought was wrong)Last edited by Fat Tony; 25-01-2012, 07:31 PM.Not actually in the least bit fat
2000 S50 Titanium Silver / Black
ACS Suspension, Exhaust & Type III Wheels
Simota carbon air intake | Strong Strut Front Brace
Comment
-
Not actually in the least bit fat
2000 S50 Titanium Silver / Black
ACS Suspension, Exhaust & Type III Wheels
Simota carbon air intake | Strong Strut Front Brace
Comment
-
Comment
Comment