Hi all,
I've been scouring the web for the resistance values I should be getting on my TPS to make sure they are correct but to no avail. I am getting the following (with 3 pin electrical connector removed and measuring with an ohmeter direct on the TPS, pin 1 at top):
Pins 1-3: Throttle closed = 4K Throttle fully open = 4K
Pins 2-3: Throttle closed = 1K2 rising linearly to 2K7 at Throttle fully open
Pins 1-2: Throttle closed = 4K8 falling linearly to 3K3 at Throttle fully open
Can anybody confirm if this is correct??
I've been scouring the web for the resistance values I should be getting on my TPS to make sure they are correct but to no avail. I am getting the following (with 3 pin electrical connector removed and measuring with an ohmeter direct on the TPS, pin 1 at top):
Pins 1-3: Throttle closed = 4K Throttle fully open = 4K
Pins 2-3: Throttle closed = 1K2 rising linearly to 2K7 at Throttle fully open
Pins 1-2: Throttle closed = 4K8 falling linearly to 3K3 at Throttle fully open
Can anybody confirm if this is correct??
Comment